HydroSeal® Clear Epoxy Sealer — 2 Gallon Kit

HydroSeal is a clear, two-component, low-VOC waterborne epoxy coating designed for interior concrete floors. It cures to a semi-gloss, chemical, and abrasion-resistant finish—ideal for residential interiors, restaurants, coffee shops, retail spaces, and warehouse floors.

Use HydroSeal alone for protection or with HydroColor or HydroStain for decorative results.

• Easy to apply self-leveling system—no roller marks, no streaks
• Rapid cure, even at 50°F—tack-free in one hour, two coats in one day
• Low-VOC, environmentally responsible formula
• Excellent adhesion and abrasion resistance, long pot life with quick dry times
• Compatible with HydroColor, HydroStain, HydroEtch, and HydroGrip for custom finishes
• Easy cleanup with soap and water

Proper surface prep is essential for adhesion:

• Ensure concrete is clean, dry, and structurally sound (min. 2,500 PSI).
• Remove all dust, oil, coatings, and contaminants.
• Mechanically profile the surface or clean with HydroEtch to open pores.

Mixing: Combine equal parts Part A and Part B by volume. Mix for 3 minutes with a low-speed drill until fully blended.

Application:
1. Apply first coat using a 3/8” nap, non-shedding roller.
2. Apply second coat within 24 hours for maximum bond.
3. Lightly abrade if more than 24 hours passes before recoating.

Coverage: 250–500 sq. ft./gal (1st coat) | 400–600 sq. ft./gal (2nd coat).

Consult the HydroSeal Technical Data Sheet for more detailed instructions and best practices.

• Interior use only
• Allow 72 hours before water exposure
• Do not freeze or apply to damp surfaces
• Use with adequate ventilation
• Avoid contact with eyes and skin
• If in eyes or on skin: Rinse with water for 15 minutes
• If inhaled: Move to fresh air
• If swallowed: Rinse mouth and call a doctor or poison control center
• Keep out of reach of children

• Store sealed containers in a cool, dry place away from freezing.
• Dispose of hardened material per local regulations; do not pour into drains.
• Maintain floors by cleaning regularly with pH-neutral detergent and avoiding harsh chemicals or abrasives.